All NKStation® Modules have a slot in them specifically for a small but distingused Identifyer TAG.

the TAGS are made out of 100% cast Acrylic and have been engraved to show a multitude of sizes and options to help you keep your INKStation® neat and tidy.

The essential building block for the modular INKStation® System.

Simply screw to the wall to provide the hanging base for any of the modules.

Screws & Wall Plugs are provided.

Tools required : Size 5 Drywall drillbit, a Cross-head screw driver or bit,
and a Spirit Level (available on most smartphones).

Installation : place the WallMount against the wall in the location desired (using Level)

Place the screws into the screw holes and give a light tap to mark the wall.

Utilising these marks, the 5mm drill bit can be used to created the holes for the wall plugs.

Insert wall plug then offer up the wall mount and screws - check for level once more and drive in the screws.

Need more space? Connect two or more WallMounts using the built-in dovetails, once the initial WallMount is in place - always ensure these are level with existing WallMounts.

These are now ready to receive any of the INKStation® Modules.

All NKStation® Modules have a slot in them specifically for a small but distingused Identifyer TAG.

the TAGS are made out of 100% cast Acrylic and have been engraved to show a multitude of sizes and options to help you keep your INKStation® neat and tidy.

The essential building block for the modular INKStation® System.

Simply screw to the wall to provide the hanging base for any of the modules.

Screws & Wall Plugs are provided.

Tools required : Size 5 Drywall drillbit, a Cross-head screw driver or bit,
and a Spirit Level (available on most smartphones).

Installation : place the WallMount against the wall in the location desired (using Level)

Place the screws into the screw holes and give a light tap to mark the wall.

Utilising these marks, the 5mm drill bit can be used to created the holes for the wall plugs.

Insert wall plug then offer up the wall mount and screws - check for level once more and drive in the screws.

Need more space? Connect two or more WallMounts using the built-in dovetails, once the initial WallMount is in place - always ensure these are level with existing WallMounts.

These are now ready to receive any of the INKStation® Modules.

All NKStation® Modules have a slot in them specifically for a small but distingused Identifyer TAG.

the TAGS are made out of 100% cast Acrylic and have been engraved to show a multitude of sizes and options to help you keep your INKStation® neat and tidy.

The essential building block for the modular INKStation® System.

Simply screw to the wall to provide the hanging base for any of the modules.

Screws & Wall Plugs are provided.

Tools required : Size 5 Drywall drillbit, a Cross-head screw driver or bit,
and a Spirit Level (available on most smartphones).

Installation : place the WallMount against the wall in the location desired (using Level)

Place the screws into the screw holes and give a light tap to mark the wall.

Utilising these marks, the 5mm drill bit can be used to created the holes for the wall plugs.

Insert wall plug then offer up the wall mount and screws - check for level once more and drive in the screws.

Need more space? Connect two or more WallMounts using the built-in dovetails, once the initial WallMount is in place - always ensure these are level with existing WallMounts.

These are now ready to receive any of the INKStation® Modules.

All NKStation® Modules have a slot in them specifically for a small but distingused Identifyer TAG.

the TAGS are made out of 100% cast Acrylic and have been engraved to show a multitude of sizes and options to help you keep your INKStation® neat and tidy.

The essential building block for the modular INKStation® System.

Simply screw to the wall to provide the hanging base for any of the modules.

Screws & Wall Plugs are provided.

Tools required : Size 5 Drywall drillbit, a Cross-head screw driver or bit,
and a Spirit Level (available on most smartphones).

Installation : place the WallMount against the wall in the location desired (using Level)

Place the screws into the screw holes and give a light tap to mark the wall.

Utilising these marks, the 5mm drill bit can be used to created the holes for the wall plugs.

Insert wall plug then offer up the wall mount and screws - check for level once more and drive in the screws.

Need more space? Connect two or more WallMounts using the built-in dovetails, once the initial WallMount is in place - always ensure these are level with existing WallMounts.

These are now ready to receive any of the INKStation® Modules.

All NKStation® Modules have a slot in them specifically for a small but distingused Identifyer TAG.

the TAGS are made out of 100% cast Acrylic and have been engraved to show a multitude of sizes and options to help you keep your INKStation® neat and tidy.

The essential building block for the modular INKStation® System.

Simply screw to the wall to provide the hanging base for any of the modules.

Screws & Wall Plugs are provided.

Tools required : Size 5 Drywall drillbit, a Cross-head screw driver or bit,
and a Spirit Level (available on most smartphones).

Installation : place the WallMount against the wall in the location desired (using Level)

Place the screws into the screw holes and give a light tap to mark the wall.

Utilising these marks, the 5mm drill bit can be used to created the holes for the wall plugs.

Insert wall plug then offer up the wall mount and screws - check for level once more and drive in the screws.

Need more space? Connect two or more WallMounts using the built-in dovetails, once the initial WallMount is in place - always ensure these are level with existing WallMounts.

These are now ready to receive any of the INKStation® Modules.

All NKStation® Modules have a slot in them specifically for a small but distingused Identifyer TAG.

the TAGS are made out of 100% cast Acrylic and have been engraved to show a multitude of sizes and options to help you keep your INKStation® neat and tidy.

The essential building block for the modular INKStation® System.

Simply screw to the wall to provide the hanging base for any of the modules.

Screws & Wall Plugs are provided.

Tools required : Size 5 Drywall drillbit, a Cross-head screw driver or bit,
and a Spirit Level (available on most smartphones).

Installation : place the WallMount against the wall in the location desired (using Level)

Place the screws into the screw holes and give a light tap to mark the wall.

Utilising these marks, the 5mm drill bit can be used to created the holes for the wall plugs.

Insert wall plug then offer up the wall mount and screws - check for level once more and drive in the screws.

Need more space? Connect two or more WallMounts using the built-in dovetails, once the initial WallMount is in place - always ensure these are level with existing WallMounts.

These are now ready to receive any of the INKStation® Modules.

All NKStation® Modules have a slot in them specifically for a small but distingused Identifyer TAG.

the TAGS are made out of 100% cast Acrylic and have been engraved to show a multitude of sizes and options to help you keep your INKStation® neat and tidy.

The essential building block for the modular INKStation® System.

Simply screw to the wall to provide the hanging base for any of the modules.

Screws & Wall Plugs are provided.

Tools required : Size 5 Drywall drillbit, a Cross-head screw driver or bit,
and a Spirit Level (available on most smartphones).

Installation : place the WallMount against the wall in the location desired (using Level)

Place the screws into the screw holes and give a light tap to mark the wall.

Utilising these marks, the 5mm drill bit can be used to created the holes for the wall plugs.

Insert wall plug then offer up the wall mount and screws - check for level once more and drive in the screws.

Need more space? Connect two or more WallMounts using the built-in dovetails, once the initial WallMount is in place - always ensure these are level with existing WallMounts.

These are now ready to receive any of the INKStation® Modules.

The essential building block for the modular INKStation® System.

Simply screw to the wall to provide the hanging base for any of the modules.

Screws & Wall Plugs are provided.

Tools required : Size 5 Drywall drillbit, a Cross-head screw driver or bit,
and a Spirit Level (available on most smartphones).

Installation : place the WallMount against the wall in the location desired (using Level)

Place the screws into the screw holes and give a light tap to mark the wall.

Utilising these marks, the 5mm drill bit can be used to created the holes for the wall plugs.

Insert wall plug then offer up the wall mount and screws - check for level once more and drive in the screws.

Need more space? Connect two or more WallMounts using the built-in dovetails, once the initial WallMount is in place - always ensure these are level with existing WallMounts.

These are now ready to receive any of the INKStation® Modules.

Store and display your Ink Cartridges, within their manufacturer-sealed packaging.

Have them to hand, within easy reach and easy to access, one-by-one - helping you organise your workspace. The Acrylic front slide shows the stock you have available of each cartridge, and the size and type of needle clearly shown on the Acrylic Tag.

Each Cartridge Holder is supplied with magnets allowing you to re-position them as you see fit in YOUR INKStation® and/or remove from the wall for the regular OCD-pleasing restock.

Tools Required : NONE

Capacity : CH Maxi has space for around twenty cartridges and will accommodate products from the majority of Cartridge suppliers. For Example - Kwadron, Peak Stellar, Bishop DaVinci, Ghost Pink, Metrix, Magic Moon, Cheyenne Safety and many more.

All INKStation® Products are made with PLA and are safely wipeable with IPA (Isopropyl Alcohol).

Store and display your Ink Cartridges, within their manufacturer-sealed packaging.

Have them to hand, within easy reach and easy to access, one-by-one - helping you organise your workspace. The Acrylic front slide shows the stock you have available of each cartridge, and the size and type of needle clearly shown on the Acrylic Tag.

Each Cartridge Holder is supplied with magnets allowing you to re-position them as you see fit in YOUR INKStation® and/or remove from the wall for the regular OCD-pleasing restock.

Tools Required : NONE

Capacity : CH Mini has space for around ten cartridges and will accommodate products from the majority of Cartridge suppliers. For Example Kwadron, Peak Stellar, Bishop DaVinci, Ghost Pink, Metrix, Magic Moon, Cheyenne Safety and many more.

All INKStation® Products are made with PLA and are safely wipeable with IPA (Isopropyl Alcohol).

Store your Nitrile/Latex Gloves, still in their box, and have them in YOUR INKStation® - within reach and easy to access from within the Glove Box Holder

The Acrylic Tag positioned in the prepared slot will clearly show the size of gloves in each box holder.

Each Cartridge Holder is supplied with magnets allowing you to re-position them as you see fit in YOUR INKStation® and/or remove from the wall for the regular OCD-pleasing restock.

Tools Required : NONE

Capacity : The GBH will hold 100 piece boxes from the majority of Glove suppliers. For Example - MediRange, DTS, Forged by Meta, Grippaz, Killer Beauty, Piranha, Safely, Unigloves and many more.

All INKStation® Products are made with PLA and are safely wipeable with IPA (Isopropyl Alcohol).

Store and display your single-use Ink Cups in the Cup Holder. Use Cups from 1mL to 6mL and have them within reach and easy to access from within YOUR INKStation®.

Lift the in-built lid to take out or refill the cups and clearly separate each size/capacity  by reference to the the Acrylic Tag positioned in the prepared Slotin each holder.

Each Ink Cup Holder is supplied with magnets allowing you to re-position them as you see fit in YOUR INKStation® and/or remove from the wall for the regular OCD-pleasing restock.

Tools Required : NONE

Capacity : Depending upon the capacity of the individual Ink Cups. Using INKStation® Inky Cups each ICH will hold : 1mL  450+ ,  2mL  300+ , 3mL 200+ , 4mL 150+ ,5mL 100+ , 6mL  50+.

All INKStation® Products are made with PLA and are safely wipeable with IPA (Isopropyl Alcohol).

Single-use, disposable, biodegradable PLA Ink Cups™, in the shape of our Mascot Inky®. This shape has been tested and approved by Artists - even the smallest (1mL) Inky Cup™ allows the artist to turn their Machine through 90o dependent on the number/size of needles.

All cups are 15mm tall - keeping the centre of gravity as low as possible, and the textured base helps grip in to the (commonly used) vaseline, avoiding tip-over.

Size/Capacity : Size 1 (1mL), Size 2 (2mL), Size 3 (3mL), Size 4 (4mL), Size 5 (5mL), Size 6 (6mL).

Keep your Ink Bottles handy and ready to quickly refill your Ink Cups. Have your bottles on display and easy to find as part of YOUR INKStation®.

Tools Required : NONE

Capacity :

The Bottle Holder Maxi HexMatrix has been designed to take 5 bottles of 240mL capacity from the majority of INK suppliers. For example Dynamic Black & White

The Bottle Holder Mini HexMatrix has been designed to take 15 bottles of 30mL or 60mL from the majority of INK suppliers. For example World Famous Tattoo, Eternal Ink, Fusion, Panthera, Intenze, Empire and many more.

Each Bottle Holder is supplied with magnets allowing you to re-position them as you see fit in YOUR INKStation® and/or remove from the wall.

All INKStation® Products are made with PLA and are safely wipeable with IPA (Isopropyl Alcohol).

Keep your Ink Bottles handy and ready to quickly refill your Ink Cups. Have your bottles on display and easy to find as part of YOUR INKStation®.

Tools Required : NONE

Capacity :

The Bottle Holder Maxi HexMatrix has been designed to take 5 bottles of 240mL capacity from the majority of INK suppliers. For example Dynamic Black & White

The Bottle Holder Mini HexMatrix has been designed to take 15 bottles of 30mL or 60mL from the majority of INK suppliers. For example World Famous Tattoo, Eternal Ink, Fusion, Panthera, Intenze, Empire and many more.

Each Bottle Holder is supplied with magnets allowing you to re-position them as you see fit in YOUR INKStation® and/or remove from the wall.

All INKStation® Products are made with PLA and are safely wipeable with IPA (Isopropyl Alcohol).